Secabo C40 Spezifikationen PDF herunterladen (Seite 6)

• You can now adjust the zero point by pressing the four arrow keys. We recommend setting the zero

point to the front right corner of the media.

• Press the Speed key to confirm the new zero point setting.

By setting the zero point, you can also target specific media positions, or avoid damaged areas

of the media.

4.8. Cutting test

• Press the Self Check key to perform a cutting test.

• The cutting test helps you verify the knife holder setting and cutting force. The cutting test should

give you clean and straight cuts in the loaded media; there should be no damage to the backing.

• If the test cuts through the backing, either the cutting force is too high, or the blade or knife holder

setting is incorrect. Change these settings and repeat the cutting test.

• You will also need to change the settings, in case of imprecise or too shallow cuts.

Knife setting correct

Knife setting too deep

Knife setting too shallow

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Secabo C40 Spezifikationen Seite 6